100W Handheld Welding Seam Laser Cleaner Stainless Welding Seam
Laser Cleaning Machine
Datasheet
| Item | L/N | Characteristics | Test Conditions | Min. | Typical | Max. | Unit |
| Electrical Characteristics | 1 | Power Voltage | 220 | 210 | 220 | 230 | AC |
| 2 | Maximum current loss | Pout=Pnom | 4 | 5 | 6 | A |
| 3 | Total Power | 600 | 590 | 600 | 610 | W |
| 4 | Fiber Cable | 5 | 5 | 5 | 10 | M |
| General Characteristics | 1 | Working temperature range | 0 | / | 60 | ℃ |
| 2 | Storage temperature | -10 | / | 60 | ℃ |
| 3 | Laser power | 100 | W |
| 4 | Peak power | >10KW | KW |
| 5 | Cooling method | Air Cooling | |
| 6 | Laser level | 4 Class | |
| 7 | Pulse energy | 1.5mJ | mJ |
| 8 | Laser wavelength | 1064 | nm |
| 9 | Preheat time | Reach to start operation | 0 | s |
| Achieve complete stability | 10 |
| 10 | Humidity | 10 | / | 95 | % |
| 11 | Laser machine size | L647*W440*H859 | mm |
| 12 | Weight | 70 | kg |
Brief introduction
Laser cleaning is one of the more modern versions of the cleaning
process and has rapidly replaced more traditional methods such as
dry-ice blasting or media blasting due to the numerous benefits
that it provides.
It offers these benefits as it works in a significantly different
way to the processes that have preceded it. Furthermore, using a
fiber laser as the medium also works in a much different way to
other types of cleaning methods. We have explored this in more
detail below and explained why laser-based cleaning is the most
efficient, safe and cost-effective cleaning solution on the market.
Applications
1. Metal surface cleaning in narrow space, no died-end;
2. Mold cleaning, such as tire mold, electronic mold, food mold,
injection mode and etc.;
3. Grease, resin, gum, dust, stains, and produce residue removal;
4. Pre-treatment of welding, bonding, remove paint, rust, grease,
weld oxide or residue;
5. Quick rust and various oxides cleaning;
6. Metal surface coating removal, rapid painting removal;
7. Cultural relics cleaning, rock cleaning, exterior cleaning of
buildings.
8. Roughening of metal surface;
9. Treatment for precision parts;
10. Aerospace weapons, ship manufacture or maintenance and etc;
11. Nuclear power unit maintenance;
After-sale service
| 1. 3-year guarantee for laser source. |
| 2. Full technical support by e-mail, call, and video |
| 3. Lifelong maintenance and spare parts supply. |
| 4. Free design of fixtures as customers required. |
| 5. Free training installation and operation for the staff. |
Why is this process better than more traditional methods?
A key question that we are frequently asked is “How does laser
cleaning work differently to the other more traditional methods?”.
There are some key problems that lasers have helped to address and
solve.
Firstly, other methods were contact processes, meaning they were
abrasive and damaging to the materials that they were working with.
Take media blasting, for example, which essentially acts like a
pressure washer, but with pressurised air, to blast a material
until it is clean. It gets the job done, but it often affects the
material that you don’t want to damage below!
Laser cleaning, on the other hand, is non-contact and non-abrasive,
and so will only irradiate the material that you want to get rid
of.
You also have a great deal of control over the beam, meaning you
can achieve the desired depth that you want to. Further to this,
you can irradiate the whole surface layer of a material, or a much
thinner layer, say the topcoat of paint, but not the primer below.
Or, should you wish, you can just clean a very small section. If
using another process which simply blasts the material, it is hard
to enjoy such a high level of control.
One of the key benefits in the way that laser cleaning works is
that not much waste is left over due to the irradiation process;
the substrate is simply vaporised rather than left as waste. The
majority of the waste that is left over comes as dust particles and
can be easily collected and removed by the user.
Previous processes left a great deal of waste that had to be
removed. Not only is this costly in terms of time efficiency, but
much of this waste was hazardous as well, and users were often
required to wear protective gear. This danger to worker safety has
been removed by the laser.
So, the key characteristics of how the laser cleaning process
works, which differentiates it from more traditional methods, are
that:
A, It is a much safer process
B, It is more efficient
C, It offers the user a higher level of accuracy and control and
D, There is a greater focus on a higher quality end result
Seam a slight depression in the smoothness of a surface More
(Definitions, Synonyms, Translation)
