500W Laser Rust Cleaning Machine High-Speed Low Noisy Handheld
Laser Rust Removal Equipment
Laser Cleaning Machine Features
1. Fast cleaning speed at low cost.
2. It can protect the surface of the cleaning object, and make sure
that it is intact. For different dirt on different substrate
surfaces, the fiber laser cleaning machine can selectively clean
the dirt without damaging the substrate by setting laser parameters
such as spot size, single pulse energy, pulse width, repetition
rate, etc.
3. It can clean the surface of the fragile material. Since laser
cleaning is non-contact between the machine and the object, it is
convenient to carry out the cleaning operation. And very easy to
clean up the area in which other conventional cleaning methods
cannot be reached.
4. It’s a green cleaning method and environmentally friendly.
Technical parameters
| L/N | Characteristics | Test Condition | Min | Typical | Max | Unit |
| 1 | Power Voltage | 220 | 210 | 220 | 230 | V/AC |
| 2 | Maximum current | Pout = Ponm | | | ≈25 | A |
| 3 | Maximum Power | Pout = Ponm, T=20℃ | | | ≈6.5 | Kw |
| 4 | Working temperature | | 0 | | +40 | ℃ |
| 5 | Storage temperature | | -10 | | +60 | ℃ |
| 6 | Cooling method | Water cooling |
| 7 | Scan Width | 1-160 | mm |
| 8 | Peak power | 200Kw |
| 9 | Humidity | | 10 | | 95 | % |
| 10 | Laser machine size | L1100 x W 840 x H1150mm | mm |
| 11 | Weight | 250 | Kg |
| 1 | Working Mode | Pulse |
| 2 | Polarization states | Random |
| 3 | Beam parameter product | Pout = Ponm | | 7.7 | | mm*mrad |
| 4 | Central wavelength | Pout = Ponm | 1060 | 1064 | 1070 | nm |
| 5 | Spectral width (3dB) | Pout = Ponm | | 8 | 15 | nm |
| 6 | Average power (Pnom) | | 500 | | | W |
| 7 | Power adjust range | | 10 | | 100 | % |
| 8 | Maximum monopulse energy | 350ns/16KHz | | | 30 | mJ |
| 9 | Pulse duration adjust range | | 200 | | 350 | ns |
| 10 | Laser beam pulse width (FWHM) | 350ns/16KHz | | | 95 | ns |
| 11 | Pulse repetition frequency | 250-350ns | 1 | | 200 | KHz |
| 200-220ns | 1 | | 400 |
| 12 | Output power instability | Pout = Ponm | | | 5 | % |
| 13 | Output beam divergence angle | | | | 70 | mrad |
| 14 | Output beam ellipticity | | 90 | | | % |
| 15 | Fiber cable length | | | 7 | | m |
| 16 | Output fiber type | 220/600 QBH | |
| 17 | Output fiber core diameter | 220 | um |
Product Application:
1. Metal surface cleaning in narrow space, no died-end;
2. Mold cleaning, such as tire mold, electronic mold, food mold,
injection mode and etc.;
3. Grease, resin, gum, dust, stains, and produce residue removal;
4. Pre-treatment of welding, bonding, remove paint, rust, grease,
weld oxide or residue;
5. Quick rust and various oxides cleaning;
6. Metal surface coating removal, rapid painting removal;
7. Cultural relics cleaning, rock cleaning, exterior cleaning of
buildings.
8. Roughening of metal surface;
9. Treatment for precision parts;
10. Aerospace weapons, ship manufacture or maintenance and etc;
11. Nuclear power unit maintenance;
Machine Advantages
| 1) non-contact cleaning, no damage to the cleaning parts. |
| 2) precise cleaning, it can achieve a precise location, the exact
size of the selective cleaning. |
| 3) without any chemical cleaning fluid, no supplies, safe, and
environmental protection. |
| 4) hand-held or with the robot to achieve automated simple operation cleaning. |
| 5) High cleaning efficiency and time saving |
| 6) The laser cleaning system is stable, with almost no maintenance. |
